Body
Any media source connected to the podium can be sent to any projector around the classroom. Each Collaboration table can also accept media sources for local group discussions.
Choose Standard or Collaboration Mode
1. Turn the system power on.
2. Choose Standard Presentation if performing a traditional, instructor-led presentation with 2 front projectors.
OR
Choose Collaboration if using the 7 stations around the room.
A. Standard Mode
- Powers the Left and Right Projectors.
- Sources supplying AUDIO must be sent to Right Projector to be heard.
The touch panel displays a list of sources, indicating which one is currently active. See 3a and 3b below
3a. Choose a source by touching the label.
3b. Select which display to send that source to by touching the desired display icon in the list.
B. Collaboration Mode
- Powers the 7 projectors around the room. Airtame is the default source at each table.
- To use Airtame or HDMI sources, use the Collaboration Space instructions located at each table.
The touch panel displays a list of sources, indicating which one is currently active. Use the Mute Mic, Mute Speaker, and Volume Adjustments to control podium sources. Table volume is controlled locally. See 3a and 3b below.
3a. Choose a source by touching the label.
3b. Select which display to send that source to by touching the desired display icon in the list. Touch the "Combine All" button to send the source to all displays.
- Audio is sent to the local table’s projector automatically. Make sure to select the source for the Ceiling Speakers if you would like to send the audio to the entire classroom.